This History Behind Citroen Remote Key Replacement Can Haunt You Forever!

· 4 min read
This History Behind Citroen Remote Key Replacement Can Haunt You Forever!

Citroen C3 Key Replacement

Citroen is a renowned French car manufacturer. They are famous for their unique designs however, they're also well-built with excellent fuel economy. The C3 is not an exception.

From 1997 onwards, Citroen keys didn't utilise transponders so making spares for these models is easy and can be accomplished in just a few minutes. Since 1998, they've got a fixed-code philips type33 transponder. The key will have to be programmed.

Dead coin battery

One of the most frequent reasons for a Citroen C3 not starting is due to the battery being dead. Examine the voltage of the car battery using a multimeter to make sure it is the cause. If the voltage is less than 12 volts it could be time to replace the battery. You can also test for corrosion at the battery's junctions if you take the pole cables off and clean them.

Spark plug damage is another reason that could cause a Citroen C3 to not work. They're typically caused by rodent damage, that's why it's vital to monitor your car or van for signs of rodent activity beneath it. If your spark plugs are damaged they will not function and your engine won't start.

From 1998 all Citroen vehicles utilise transponder chips inside the remote fob / key. These chips must be programmed to allow the vehicle to start, open and close the doors. Making spare keys for the current generation of Citroen is quite easy and can be completed at home in a matter of minutes. Keys that are lost require a PIN number that can be found underneath a scratch board on a plastic 'SECURITY CARD which is the size of an credit card in the wallet of the owner (see below for a picture).

XL Locksmiths offers a mobile service that is swift and efficient for Citroen key replacements for cars. Based in London they will be at your location in just 30 minutes to solve any issues that your car key might face. They can also help reprogramme Citroen.

Keyless entry system malfunctioning

If your car shows Key not detected or cannot start the engine after you press the key fob button, it may be a problem with the keyless entry system. It could be due to a number of ways, including the battery being weak or dead inside the keyfob as well as the chip is damaged in the key. These issues could also be caused by water damage. To remedy the issue, try reprogramming the key or replacing the batteries.

Always use authentic Citroen key batteries. They come with metal clips that keep the battery in position and complete the circuit. Replace the battery with a new battery that is of the same voltage and same size as the original. Otherwise, it can damage the fob.

A defective receiver can cause issues with your keyless entry system. A malfunctioning module is often difficult to determine since it can be random or intermittent. However, you can try to resolve the issue by disconnecting the battery for a short period of time. This will reset the onboard computers.

You can reprogram your CitroenC3 by following the directions in the owner's guide if you have an extra. Every model and manufacturer has its own method to reprogram a Citroen Key. Refer to the manual for find specific instructions.

Faulty receiver module

Citroen, a French automaker, comes with a variety of models, including the Xsara and Tourer. Other models include the Berlingo, Picasso, Cactus, and Tourer. The models feature remote keys that allow you to lock and unlock your vehicle from a distance, without inserting the keyblade inside the door locks. The remote key communicates with the central locking system of the car using radio frequency. If the signal gets disrupted it will not work or may only work at a distance. The interference is caused by objects and weather conditions. It could also be caused by transmitters that operate on the same frequency.



If the key fob you're using isn't working, it could be caused by an inoperative coin battery or a defective receiver module. The battery that is dead is usually the first component that can be replaced, and the process should take only several minutes. Replace the button-cell battery with a brand new battery. Make sure you use a battery with the same size and voltage. Test the lock and unlock buttons after replacing the battery to make sure they're working as intended.

The key fob can also malfunction due to water damage or a lost transponder chip. If the key has been lost, a professional is able to restore synchronisation with the car by using special diagnostic equipment. It is cheaper and faster than to buy a new set from a dealer.

Chip that is damaged

Citroen is one of the most innovative brands in the automobile industry. Their cars are recognized for their unique design as well as benchmark comfort and performance. These cars can be plagued by problems. These problems usually involve the key fob or its chip. The positive side is that most of the issues can be resolved easily.

The key fob of your Citroen C3 has been designed to be more durable than other keys for cars. However, it could be damaged if it is exposed to water. If your key fob accidentally takes to the sink or the washing machine, it could be damaged. To avoid  citroen berlingo replacement key  make sure that your key fob is fitted with metal retaining clips that keep it in position. These clips will keep the battery contacts clean and free of corrosion.

You should also ensure that the circuit board on your Citroen C3 is intact and not cracked. The key won't function correctly if the circuit board been damaged.

If you have lost the only car key for a Citroen it is essential to contact an expert from your local area right away. You can replace keys quickly and effectively. Additionally, you can save yourself some money by utilizing a mobile locksmith instead of going to a dealership.